fbpx

FREQUENTLY ASKED QUESTIONS

Q

A

Which exterior surfaces does ACTIVATE work on?

Activate works on most external hard surfaces: natural stone, block paving, resin, stone walls, paved areas, pathways, patios, porcelain, rendered walls, timber decking and composite decking.

Q

A

Am I better to buy the solution or the granular form?

Either will do the same job but the granular form is easier to store and more cost effective because once diluted it covers a larger surface area.

Q

A

Is ACTIVATE pet friendly?

Yes it is pet friendly but to be sure we recommend though that you keep your pets off the treated area until the solution has dried. 

Q

A

What is the best way to apply ACTIVATE?

We recommend that you apply the product using a garden sprayer. Wash the sprayer out well with warm water afterwards. 

Q

A

How do I use the granular form?

Add the granules to water, (don’t add the water to the granules) stir until dissolved, they dissolve faster if you use warm water. Mix outdoors.

Q

A

What are the dissolving rates for the granular form?

Dissolving rates: full bag – 20 litres of water / half bag – 10 litres of water. 

Q

A

Do you recommend wearing protective clothing when applying the product?

Yes, we recommend you wear suitable protective clothing and gloves. Avoid contact with eyes and skin. Mix granular form outdoors. Do not inhale dust/vapours.

Q

A

When should I apply ACTIVATE?

We recommend that you apply the product when it is dry weather. Not when it is about to rain. This allows time for the product to soak in to the areas.The product is reactivated once it rains so you will notice the area getting cleaner every time it rains for a while.

Q

A

Will it get rid of the moss growing in between my block paving?

Yes, it will get rid of the moss. If you treat the area quite generously depending on how bad it is and then every few months give the area another spray it will keep your drive moss free all year round. Make sure you saturate the surfaces well, this will soak in to the joints. Be patient because the results will improve over time as the product soaks in to the joints and the rain re-activates it.

Q

A

Will I need to jet-wash my area first?

No need to jet wash the area unless it is really bad. 

Q

A

Will jet-washing my drive every year cause harm in the long run?

Yes, the powerful force of the jet wash will blast away the sand/jointing compound in-between the blocks. Eventually this will cause displacement of the blocks and create an uneven surface.

Q

A

Does ACTIVATE work on imprinted concrete?

Yes, ACTIVATE works on most external hard surfaces

Q

A

Does it kill weeds?

Yes, it is effective on weeds but primarily an algaecide so works on anything that is green. It does not contain weed killer.

Q

A

Does it work on normal paving slabs, i.e. not real stone?

Yes, ACTIVATE works on most external hard surfaces. Your paving slabs will definitely look cleaner.

Q

A

Does ACTIVATE work on Indian and imported stone?

Yes, ACTIVATE works on all natural stone products with fantastic results, it helps to rejuvenate the original colour.

Q

A

I’m not sure which to buy or how much to buy and would like your advice. Can I email you with my enquiry and some photos?

Yes, we are happy to advise you. Send your email to info@activatesolutions.co.uk or post an enquiry on the contact page.

Q

A

Does ACTIVATE work in Winter?

Yes, ACTIVATE works all year round. It is ideally used as a maintenance product, so we recommend you apply 3-4 times a year to keep your area clean all year round.

Q

A

Can somebody come and treat my patio/driveway for me instead of my buying the product?

Yes, visit our IREVIVE website and leave us your details, someone will get in touch.